6.5 HP GAS POWERED COMPACTOR / ROLLER
WALK BEHIND DESIGN

Model Number #PDCR88

Commercial Quality - Long life Unit

The PDCR88 Walk Behind roller is suitable for compacting thin layers on granular soils and asphalt. They are mostly used for small jobs, repair work and compaction in confined areas. A hydrostatic vibration drive gives maximum compaction effect. The unit offers progressive control for both speed and forward/reverse motion which provides smooth starting and stopping. High maximum speed gives greater surface coverage.

Comes Complete:
• 6.5 HP PD200 Commercial Quality Engine
• Manual Start
• OHV Air-cooled Engine
• 4-Stroke Single Cylinder Engine
• Low Oil Automatic Shut Down
• Working width: 22.0 inch
• Forward Speed: 361 foot /hr
• Backward Speed: 361 foot /hr
• Grade ability: 200/250
• Setting rotate speed: 2800/min
• Frequency: 77Hz
• Swing: 0.02 inch
• Centrifugal force 2248 lbf
• Actiyator Range: 17 lb/inch
• Asperse form Gravity Sprinkling
• Water tank volume 16 L
• Weight: 385 lbs
• Measures 71.2 X 36.2 X 36.2 inch
• Ships Common Carrier Truck
• One year Mfg. Limited Warranty