Duebre Specialty Jetter Nozzles

Duebre Specialty Jetter Nozzles

Duebre's selection of specialty nozzles offer unique solutions for unique applications, whether you're dealing with tough grease blockages or the cleanup at the end of your day.

Aquadrill

Rotating nozzle with powerful rear thrust designed for removing blockages from vertical pipes. The Aquadrill is propelled by 6 or 8 rear jets, sending the rotating body with its single front jet up vertical pipes to penetrate and flush blockages and grease. Suitable for use with hot water up to 190° F.

Starting at $591.00
Free Freight - 48 States

Choose Model

State max: PSI & GPM of jetter

State length of hose

Duebre Aquadrill complete package

PART # Inlet Front Jet # Ceramic Inserts / Angle Flow Price

DUB 0624-C012-PKG 1/2" 1.2mm 6x M4 18° Rev ~10.6 GPM $591.00

DUB 0624-C000-PKG 1/2" 1.4mm 6x M4 18° Rev ~15.8 GPM $591.00

DUB 0625-C000-PKG 1" 2.6mm 8x M6 18° Rev up to 80 GPM $736.00

DUB 0625-C0021-PKG 1" 2.1mm 8x M6 18° Rev up to 50 GPM $736.00

Hollow Nozzle

Hardened steel body with intense pulling power to flush stones and sand With a robust hardened steel body, the Hollow nozzle boasts incredibly strong pulling and cleaning power due to its numerous rear thrusting jets. Lightweight construction is propelled with several flat-angle water jets to remove deposits, stones, and sand.

Starting at $794.00
Free Freight - 48 States

Choose Model

State max: PSI & GPM of jetter

State length of hose

Duebre Hollow Nozzle complete package

PART # Inlet # Ceramic Inserts / Angle Diameter Price

DUB 4501-C000-PKG 1" 8x M6 20° Rev / 8x M6 15° Rev 3" $794.00

DUB 4502-C000-PKG 1" 4x M10x1 20° Rev / 4x M10x1 15° Rev 4.3" $1,257.00

DUB 4502-C300-PKG 1" 8x M10x1 20° Rev / 8x M10x1 15° Rev 4.3" $1,744.00

Dump Nozzle

Designed with extreme rear thrust ideal for drainage pipes. The Dump nozzle uses up to 10 rear jets to attack drainage pipes with extreme pulling and flushing force. When connected to a lightweight hose and adjusted to the appropriate water pressure, this nozzle can travel up to 400 meters (about the height of the Empire State Building) down the line. The extremely flat jet angles are aggressive and require the use of an abrasion- and wear-resistant hose.

Starting at $808.00
Free Freight - 48 States

Choose Model

State max: PSI & GPM of jetter

State length of hose

Duebre Dump Nozzle complete package

PART # Inlet # Ceramic Inserts / Angle Diameter Price

DUB 0401-C000-PKG 1" 4x M10x1 8° Rev / 4x M10x1 5° Rev 3.1" $808.00

DUB 0402-C000-PKG 1" 5x M10x1 8° Rev / 5x M10x1 5° Rev 3.9" $989.00

Mustang 6 & 8

An economical, high-thrust nozzle able to run at very low pressures. This cost-effective nozzle boasts maximum efficiency at minimum pressure, with extraordinary cleaning power achieved at or below 1600 psi at the pump. Conserve water and fuel with this efficient and budget-friendly nozzle when clearing grease, sediment, or needing to clean the top of the pipe as well.

Starting at $585.00
Free Freight - 48 States

Choose Model

State max: PSI & GPM of jetter

State length of hose

Duebre Mustang Nozzle complete package

PART # Inlet # Ceramic Inserts / Angle Description Price

DUB 0560-C000-PKG 1" 6x M10x1 17° Rev 6–High Thrust $585.00

DUB 0580-C000-PKG 1" 4x M10x1 20° Rev / 4x M10x1 25° Rev 8–High Cleaning $694.00

Phantom

Lightweight, aircraft-grade aluminum makes for a light yet robust nozzle. The Phantom was specially designed with adjusted outlet angles (18°) to clean landfill pipes and refurbished sewer lines. This pushing nozzle is ideal for flushing the bottom of pipes from grease, sand, and sediment. The Phantom's reducers can be removed for attaching to a bigger hose. The softer material will wear over time to "erase" the indicator ring, showing when it is time to order your replacement.

Starting at $923.00
Free Freight - 48 States

Choose Model

State max: PSI & GPM of jetter

State length of hose

Duebre Phantom Nozzle complete package

PART # Inlet # Ceramic Inserts / Angle Description Price

DUB 0971-C000-PKG 3/4" 8x M10x1 18° Rev Aluminum $923.00

DUB 0970-C000-PKG 1" 8x M10x1 18° Rev Aluminum $937.00

DUB 0970-VACHR-PKG 1" 8x M10x1 18° Rev Chromed Aluminum $1,067.00

T-Bomb

Hydrodynamically designed to clean 360 degrees and flush grease, deposits, stones, and sand. A combination of flat fan jet nozzles at the top and round jet nozzles in the rear provide the perfect solution for cleaning prior to CCTV inspections. The umbrella-style cleaning attacks deposits from all points without having to slow down like rotational nozzles. This nozzle can be mounted to a cage to keep it centralized while clearing grease, stones, or sand.

Starting at $893.00
Free Freight - 48 States

Choose Model

State max: PSI & GPM of jetter

State length of hose

Duebre T-Bomb Nozzle complete package

PART # Inlet # Ceramic Inserts / Angle Price

DUB 0309-C000F-PKG 1/2" 1x M6 0° Fwd / 8x M6 60° Rev / 8x M6 30° Rev $893.00

DUB 0310-F000F-PKG 3/4" 1x M10x1 0° Fwd / 6x M10x1 60° Rev / 6x M10x1 30° Rev $1,165.00

DUB 0305-F000-PKG 1" 5x M10x1 60° Rev / 5x M10x1 30° Rev $1,041.00

DUB 0307-F000-PKG 1" 7x M10x1 60° Rev / 7x M10x1 30° Rev $1,397.00

Return to Duebre Nozzles