SIPP & CIPP Relining SIPP & CIPP Pipe Lining FAQ

Can I recycle the material? Yes, all material may be recycled back into storage containers after the job is completed. How water sensitive is the material? Raw material must be stored in a dry area and completely sealed. What is the weight of the machine? With tanks it’s approximately 160lbs. What materials can this adhere to? Cast iron, PVC, Metal, concrete, clay, terracotta, wood, steel. How clean must it be in order to spray? Pipe must be free of rust, debris, oil, and other contaminants. How do I clean the pipe? Descaling and/or jetting machine, which are part of the package. How to dry the pipes? Using air blower/dryer which is part of the package. What prep needs to be done? None, machine is plug and play! Can you provide references? We are able and willing to provide references. Contact us at 714-410-0707 ext. 1 How much does training cost? Training at our facility is free. Do I have to replace hoses after each use? NO, hoses are reusable. What is the smallest and largest diameter the machine can spray? The smallest is 2” however it does depend on the condition of the pipe (interior build-up, etc.) We do recommend brush coating for this size which can go down to 1.25”. Also, spray head is 1.25” diameter and thus will make multiple coats a bit more challenging. How much manpower needed to operate machine? PCP Micro can be managed with 1 technician, all other units should have 2 technicians at a minimum. Does material need to be heated-up first? Generally NO, as it is low viscosity, however in very low temps we do recommend heating first. What are the most common problems/issues with machine/material? Most common issue is when the system is not cleaned properly causing the material to harden and or gum-up the in machine, requiring you to repair/replace certain parts. How long is the training? 3 days How can I get trained and where? We provide training and we prefer training to take place at our facility, in Surf City U.S.A. AKA Huntington Beach, however, if that’s not an option we can send a technician to you at an additional cost. If you were not able to find the answer you were looking for in this section, call Amazing Machinery at 1-800-504-7435 to speak with one of our experienced Jetting Staff Members.

ORDER TODAY! 1-800-504-7435

Home | Contact Us | Site Index | Links | Jetter FAQ | Articles | Testimonials | Terms of Use | Privacy

Plumbing & Contractor's Equipment since 1995