General DRZ-PH Drain Cleaner

General DRZ-PH Drain Cleaner

Looking for a cleaner way to clean drains? This drain cleaning machine is the answer. Light and powerful for its size, the DRZ-PH is ideal for clearing clogged sinks, tubs, and laundry drains in 1-1/4" to 3" drain lines up to 50 ft. long. No need to wear your arms out holding a heavy machine over the drain or under the sink. The compact design lets you operate the machine horizontally on the kitchen counter or vertically on the floor next to the tub. Use the pneumatic pedal to keep your hands free to control the feed and guide hose. And the silent motor won't disturb your customers while on the job. Weighing as little as 30 lbs. this lightweight machine is easy carry to handle. Use the carrying handle on top to carry to and from the job.

DRZ-PH Drain Cleaner

• Clears clogged sinks, tubs, and laundry drains in 1-1/4" to 3" lines.
• Compact, lightweight small line drain cleaner with easy carrying handle on top
• Variable speed power cable feed drives and retrieves cable at up to 16 ft. per minute.
• Four foot guide tube keeps hands, and jobsite, clean.
• Powerful yet silent motor spins cables up to 50 ft. down the line.
• Quick-change cable cartridge system allows clean and easy cable changes.
• Rugged rust resistant aluminum drum can carry 50 ft. of 1/4" or 5/16", or 35 ft. of 3/8" Flexicore cable.
• Flexicore® wire rope center cables have unequalled strength yet the right amount of flexibility.
• Made in U.S.A.

Starting at $1097.00
Free Freight - 48 States

PART # What's Included w/HECS Cutter Set* Price

DRZ-PH Basic Unit: Variable Speed Cable Feed,
4 ft. Guide Hose, Aluminum Drum, Motor,
Water-Proof Air Foot Switch, Plastic Cartridge. $1097.00

DRZ-PH-A Basic Unit + 50HE1-A-DH (50 ft. x 5/16") None $1124.00

DRZ-PH-B Basic Unit + 50HE1-AC (50 ft. x 5/16") $1215.00

DRZ-PH-C Basic Unit + 35HE2 (35 ft. x 3/8") $1207.00

DRZ-PH-D Basic Unit + 50HE1 (50 ft. x 1/4") None $1146.00

* HECS Cutter Set: Arrow Head, Boring Gimlet, Down Head Boring Gimlet, 1-1/4" Side Cutter Blade, Flexible Arrow Head Cutter.

Model DRZ-PH with Power Cable Feed
The variable speed power cable feed on the Model DRZ-PH gives you complete control as it feeds and retrieves the cable at up to 16 ft per minute. The four foot guide tube means you never have to touch the cable - so your hands, and the job site, stay clean.

Cartridge Refill
To switch to a different diameter cable (or even connect two 3/8" cables together), you just loosen three screws, pull the front of the drum off the cable, and load another cartridge. Changing takes less than a minute and turns what could be a messy job into a clean one. The tough plastic cartridges are so inexpensive, you'll probably want to store all of your cables in them.

Weight:
Weight: 30 lbs. (13.6 kg) (without cable)

Dimensions:
20" deep (w/o Guide Hose) x 11" wide x 15" high (51 cm x 28 cm x 38 cm)

Model DRZ-PH Drum:
Heavy gauge stamped aluminum with inner drum to prevent cable tangling.

Flexicore® Cable:
Heavy gauge wire is coiled around 49 strand wire rope and then heat treated. This cable has unequalled strength and the right amount of flexibility. It's so tough, it has a one year warranty against defect or breakage.

Capacity:
50 ft. of 1/4" or 5/16" cable; 35 ft. of 3/8" cable.
All cables are left hand wound and reinforced with a wire rope center.

Model DRZ-PH Power Cable Feed:
Variable Speed; Drives 1/4", 5/16" and 3/8" cables.

Cutter Set:
Arrow Head, Boring Gimlet, Down Head Boring Gimlet, 1-1/4" Side Cutter Blade, Flexible Arrow Head Cutter.

Motor:
1/5 hp, with forward-off-reverse switch, fuse protected.

Foot Pedal:
Pneumatic foot pedal leaves operator's hands free to control cable.

Return to General Wire Drain Cleaning Machines