General Rodrunner Drain Cleaner

General Rodrunner Drain Cleaner

The Rodrunner offers all the features that contractors like in a sectional sewer cleaner - light weight, high speed cable rotation, and short quick-coupling cables.

Two Way Operation: Most often, you set the Rodrunner up close to the drain opening. However, on easier jobs where you have some working room, you can run the machine "lawn-mower" fashion, standing behind the machine.

For close-up work, the wheel brake is set, the power switch is placed next to the machine to be used as a foot switch, and the cable guide hose is attached. Now, the Rodrunner is ready to handle the toughest stoppages in 3-10" lines, as far as 200 feet away.

A heavy-duty 3/4 hp motor with capacitor and overload protection spins cable at 485 rpm, an ideal speed for self-feeding into the line while protecting the cable against sudden torque build-ups. For additional protection, the Rodrunner has an adjustable slip clutch, which is factory set at 18-20 ft. lbs. An optional set of jaws (R-R10AD) enables the Rodrunner to drive 15 ft. x 7/8" (15R10) cables to clear smaller lines.

Rodrunner® Drain Cleaner

• Self feeds 8, 10 and 15 foot sectional cables.
• Pneumatic foot pedal frees both hands to control cable.
• Can be used as "Close-up" or "Walk-behind" machine.
• 3/4 hp motor can drive sectional cables 200 ft. down the line.
• Safety slip clutch protects against sudden torque build-ups.
• Features folding handle, 10" tires, and cable counter.

Starting at $4,685.00
Free Freight - 48 States

All Units Include: 3/4 hp Capacitor Motor w/Rev. Switch, Water-Proof Air Foot Switch, 20 ft. Power Cord w/GFI, Leather Gloves.

RDCS Cutter Set*

PART # Cable Sections G L Weight Price

RD Basic Rodrunner w/ 3/4 hp Heavy Duty Motor w/Rev. Switch, WaterProof Air Foot Switch, 20 ft. Power Cord w/GFI, Leather Gloves, (no cable). 105 lbs. $4,685.00

RD-GP Rodrunner Package w/ Ten 10GP (10' x 11/4") Proflex Sections w/"G" Connectors, Rear Guide Hose, RDCSG Cutter Set. 258 lbs. $6,278.00

RD-LP Rodrunner Package w/ Ten 10LP (10' x 11/4") Proflex Sections w/"L" Connectors, Rear Guide Hose, RDCSL Cutter Set. 278 lbs. $6,181.00

*RDCS-G Cutter Set: Spear Head, Hook Auger, 2" U-Cutter, 3" Heavy Duty Side Cutter, 3" Heavy Duty Saw Blade,
4" Rotary Saw Blade, Large Retrieving Tool, Coupling Wrench.

*RDCS-L Cutter Set: Spear Head, Hook Auger, 2" U-Cutter, 3" Heavy Duty Side Cutter, 3" Heavy Duty Saw Blade,
4" Rotary Saw Blade, Large Retrieving Tool, Coupling Wrench.

Two Way Chuck Handle:
Locked down against cable, you have both hands free to hold the cable. This is a real help when pulling cable out of the line.

Pneumatic Power Switch:
Power switch is located on handle for storage and use in "walk-in" operation. For close-up work, it's removed from handle for use as a foot switch.

Cable Feeding Tool:
It enables cable to get around tight bends and traps by taking advantage of open-wound design of cables. Note that operator controls machine by using power switch in foot pedal mode.

Dimensions:
22" wide x 19" high with handle folded down.(56 cm x 48 cm)

Weight:
105 lbs.

Motor:
Heavy-duty 3/4 hp with capacitor and 20 ft. power cord rotates cables at 485 rpm. Equipped with ground fault circuit interrupter.

Wheels:
10" rubber rear wheels, 6" solid rubber caster wheel.

Wheel Brake:
Locks rear wheels in place or releases them in an instant.

Combination Hand or Foot Operated Power Switch:
Air activated for safety; no electrical connection between motor and switch; can be used as hand or foot switch. Eleven foot air tube.

Twin V-Belts:
For better power transmission.

Safety Clutch:
An adjustable spring-loaded clutch is mounted at the rear of the cable drive shaft. Accessible without removing machine housing.

Chuck Handle:
Clamps on cable or acts as "dead-man's throttle."

Cable Counter:
Manually operated, to record number of cables in line.

Rear Cable Guide Hose:
To limit cable whipping behind machine.

Folding Handle:
Reduces truck storage space.

Cutter Set with "G" Connectors:
Spear Head, Hook Auger, 2" U-Cutter, 3" Heavy Duty Side Cutter, 3" Heavy Duty Saw Blade, 4" Rotary Saw Blade, Large Retrieving Tool, Coupling Wrench.

Cutter Set with "L" Connectors:
Spear Head, Hook Auger, 2" U-Cutter, 3" Heavy Duty Side Cutter, 3" Heavy Duty Saw Blade, 4" Rotary Saw Blade, Large Retrieving Tool,Coupling Wrench.

Return to General Wire Drain Cleaning Machines