General Root 66 Drain Cleaner
The Root 66 is a real advance in sectional cable machine design. No mid-range machine has its versatility and power.
Look at its versatility. You can drive 5/8" cables for lines up to 3" and 7/8" cables for 4" lines - and you can switch from one to the other in seconds, without touching the jaws, without an adapter, without tools. And for sink drain work, slip on a drum that holds smaller cables.
To operate, just feed a cable into the line and slide the back end into the machine. The excess cable goes into a guide tube. Turn on the sealed motor, press down on the handle, and the Root 66 starts spinning the cable at 400 rpm. The cable stops rotating as soon as you lift the handle, so there's no additional torque buildup. When using a drum for small drain work, the drum stops turning when you lift the handle to the neutral position.
|
Root 66® Drain Cleaner
• It's three machines in one.
• Clears 1-1/4" through 4" drain lines.
• Drives both 5/8" and 7/8" sectional cables.
• Change cables instantly-no tools or adapters required.
• Small drum (Model E) holds 25 ft. of 5/16" cable to clear 1-1/4" to 2" lines.
• 1/2 hp sealed motor.
• Optional Dolly available.
|

Starting at $2,683.00
Free Freight - 48 States
|
| |
| Root 66 Basic Unit and Packages |
| |
|
|
|
|
|
PART #
|
Cable(s)
|
Weight |
Price
|
|
| RT-66 |
Basic Root 66 w/ 1/2 hp Motor w/Rev. Switch, 10 ft. Power Cord w/GFI, Leather Gloves, (no cable). |
47 lbs. |
$2,683.00 |
|
| RT-66-A |
Basic Unit + SEVEN 7.5R8 Sections, 66RGH Rear Guide Hose, R8CS Cutter Set, PLUS: R1-1/2CG ClogChopper |
72 lbs. |
$3,317.00
|
|
| RT-66-C |
Basic Unit + SIX 15R10 Sections, 66RGH Rear Guide Hose, R10CS Cutter Set, TB66 Tool Box, PLUS: R2CG10 ClogChopper |
122 lbs. |
$3,572.00 |
|
| RT-66-CP |
Root 66 Package w/ five 15R10P Sections, CC Cable Carrier, Rear Guide Hose, R10CS Cutter Set, Tool Box |
122 lbs. |
$3,331.00 |
|
| RT-66-D |
Root 66 Package Combines Units A and C |
143 lbs. |
$4,185.00
|
|
| RT-66-DP |
Root 66 Package Combines Units A and CP |
143 lbs. |
$3,742.00
|
|
| RT-66-E |
Root 66 Package Same as RT66D, plus Drum with 25HE1A (25' x 5/16") Cable Installed |
153 lbs. |
$4,580.00 |
|
| RT-66-EP |
Root 66 Package Same as RT66DP, plus Drum with 25HE1A (25' x 5/16") Cable Installed |
153 lbs. |
$4,122.00 |
|
| |
| *R-8CS Cutter Set (for 5/8" cables): Arrow Head, Boring Gimlet, 1-1/2" U-Cutter and Retrieving Tool. |
| *R-10CS Cutter Set (for 7/8" cables): Spear Head, 2" U-Cutter, 3" U-Cutter, Hook Auger and Retrieving Tool. |
|
|
Cables:
"T" slot couplings slide together to lock and uncouple with a pin key.
5/8" x 7-1/2 ft...for 1-1/4" through 3" lines up to 100 ft long;
7/8" x 15 ft....for 2" - 4" lines up to 125 ft. long.
Stability and Durability:
The Root 66 has a wide four point base for greater stability. Its interlocking tubular construction also gives it excellent durability. To protect the gears from dirt and for easier cleaning, the machine has two internal plastic shields. A ground fault circuit interrupter is standard equipment.
Jaws:
Drive both 5/8" and 7/8" cables without adjustment; also grip containers for smaller diameter cables.
Leather Gloves:
With double-reinforced palm for hand protection when guiding cable.
Weight:
Weight: 42 lbs. (19 kg) without cable
Drip Guards:
Two shields to protect bearings and motor from dirt and moisture.
Clutch:
Pull down two position handle to spin cables at 400 RPM. Lift to stop. Brake stops spinning drums instantly.
Motor:
Sealed 1/2 hp with forward - off - reverse switch, ten foot power cord and ground fault circuit interrupter.
Dimensions:
16" deep; 14" wide; 17" high. (40 cm x 35 cm x 43 cm).
Flexicore® Cable:
Heavy gauge wire is coiled around 49 strand wire rope and then heat treated. This cable has unequalled strength and the right amount of flexibility. It's so tough, it has a one year warranty against defect or breakage. 3/4" diameter for 4-10" lines and 3" lines without sharp bends. 5/8" diameter for 3-6" lines.
R-8CS Cutter set for 5/8" cables:
Arrow Head, Boring Gimlet, 1-1/2" U-Cutter and Retrieving Tool.
R-10CS Cutter set for 7/8" cables:
Spear Head, 2" U-Cutter, 3" U-Cutter, Hook Auger and Retrieving Tool.
|
|
|
Return to General Wire Drain Cleaning Machines
|
ORDER TODAY 1-800-504-7435

Home | Contact Us | Site Index | Links | Jetter FAQ | Articles | Testimonials | Terms of Use | Privacy
Plumbing & Contractor's Equipment since 1995
|
Viztrac
SeeTek
Milwaukee
Forbest
Ridgid
General Wire
Opticam
Hathorn
Electric Eel
Locators - Line & Sonde
BossJet
Ridgid
General Wire
EzJet
Electric Eel
Trailer Mounted Jetters
Hot Water Jetters
Jetter Hoses
Jetter Nozzles
Jetter Parts & Accessories
Cyclone
Ridgid
General
Milwaukee
Valor
Ridgid
Milwaukee
Torque Master
General Wire
Electric Eel
Replacement Cables & Parts
Well Drills
Horizontal Boring & Drilling
Trenching Machines
RNVac Industrial Vacuums
Excavation Nozzles
Jetter Pumps
Vacuum Pumps
Transfer Pumps
Sump Pumps
Sewage Pumps
Grinder Pumps
Effluent Pumps
Turbine Pumps
Well Pumps
Pipe Patching
Pipe Thawing & Freezing
Pipe Plugs
Leak Detectors
Hydrostatic Line Tester
Smoke & Smoke Blowers
Pipe Threading Machines
All Parts & Accessories
EzJet Jetter Specials
Viztrac SC Sewer Cameras
Jetter Conversion Kits
BossJet Trailer Jetters
Clearance Specials
Milwaukee Power Supplies

|