Zoeller M73 Sump Pump

Zoeller M73 Sump Pump

M73 Sump Pump with 9' Cord

The 1/3 HP Model M73 automatic Sump Pump is designed to remove groundwater from basement sump applications. This corrosion resistant pump will provide the dependability expected from a Zoeller pump. Backed by a 2-year warranty, every pump is submerged in water and tested to its published performance curve, ensuring it meets your expectations and delivers peace of mind right-out-of-the-box.
Features and Benefits:

Oil-filled motor and cast iron motor housing for optimal heat dissipation which prevents the pump from overheating.

Automatic pump with a time-tested, reliable, preset, built-in snap action switch that makes for easy installation.

Corrosion resistant engineered plastic vortex impeller to allow free passage of solids which prevents clogging and lessens downtime.

Engineered plastic float guard that prevents material or debris from collecting on the float ensuring proper operation every time.

Compact and lightweight design allows the pump to fit in sump pits as small as 10" in diameter.

Epoxy finish provides corrosion-resistance and extends the life of the pump in residential sump applications.

Stainless steel screws and cord mounting hardware are rust resistant ensuring the pump can be relied upon for years of service.

100% Factory Tested - every pump is submerged in water and tested at the factory to ensure that it performs as expected when you receive it.

Comes with a 2-year limited warranty giving you protection over your investment and the peace of mind you expect in a quality product.

Specifications:

Max Flow Rate: 38 GPM

Horsepower: 1/3 HP

Voltage: 115 V

Phase: 1 Ph

Amps: 5.5

Hertz: 60 Hz

RPM: 3450

Discharge: 1-1/2" NPT

Solids Handling: 3/8" (9 mm) spherical solids

On/Off Points: 6-1/2" (16.5 cm) / 2-1/2" (6.3 cm)

Impeller Material: Engineered Plastic

Impeller Type: Vortex

Cord Length: 9' (2.7 m)

Sales Sheet

Installation Instructions

Technical Data Sheet

Price $255.00

Free Freight - 48 States

Zoeller M73 Sump Pump

Model Description Price

# 73-0001 M73 Sump Pump with 9' Cord $255.00

Our Model 73 Sump Pump is designed to remove unwanted groundwater in residential basement sump applications. The 1/3 HP Model 73 is an economical option when a sump pump is required.

The Model 73 is compact, lightweight, and economical. Additionally, it is a fully automatic sump pump with a built-in float switch. So, it can be installed in minutes and depended upon for years. The Model 73's switch motor housing is constructed of cast iron to maximize heat dissipation. The cap, pump housing, and based are constructed of engineered plastic. This durable plastic allows the Model 73 to withstand a wide variety of basement sump conditions. The corrosion resistant engineered plastic vortex impeller has a smooth surface allowing water and solids to pass freely through the pump.

Every pump is submerged in water and tested to its published performance curve, ensuring it meets your expectations and delivers peace of mind right-out-of-the-box.

Return to Sump Pumps

Not sure which Zoeller Sump Pump is right for you? Call us and allow one of our knowledgeable sales staff to guide you.