PipeCast Rigid Resin System

PipeCast™ Rigid Resin System

PipeCast Rigid Parts A & B

PipeCast Rigid is a 1:1, fast-set, spray applied two-component structural polyurethane coating, highlighted by its high tensile strength and flexural modulus. When properly applied, this unfilled coating should last after the substrate deteriorates. Ideal cure temperature is 75°F for 24 hours.

PipeCast Rigid adheres extremely well to prepared concrete.

PipeCast Rigid should be applied through a two component, heated, high pressure proportioning unit (1A:1B) capable of dynamic spray pressures of 2000 psi.

Reactor heat should be set at 160°F for A and B sides along with the hose.

At least 4" – 8" static mix nozzle must be used.

Material must achieve a uniform temperature between 120°F to 160°F before spraying. See our Pipe Lining FAQs

Material must be agitated or stirred constantly or every ten minutes (depending on if you have added an internal agitator or not to the material cannisters).

Each $887.07
Free Freight - 48 States

PipeCast™ Rigid Resin System

Part # Size Description Price

90815 5 gallon PipeCast Rigid Part A, red $887.07

90816 5 gallon PipeCast Rigid Part B, blue $887.07

90815+90816 2 x 5 gallon PipeCast Rigid Part A & B $1,774.14

Features & Benefits:
Fast Cure Time – Achieves full structural strength in record time, reducing downtime and increasing efficiency.

Superior Bonding – Exceptional adhesion to a variety of substrates, ensuring a reliable and longlasting solution.

Chemical & Abrasion Resistance – Designed to withstand aggressive environmental conditions, ensuring extended service life.

Versatile Applications – Ideal for SIPP lining, protective coatings, and structural reinforcement in municipal and industrial projects.

Meets Industry Standards – Developed in accordance with ASTM F1216 to guarantee quality and reliability.

Return to IPP Resins
SIPP & CIPP Pipe Lining FAQ