Dig Pig Tool Grabbers

Tool Grabbers

Mount in your upright cabinet or shop. Allows lances and nozzles to drain properly to avoid freeze-ups. No annoying pins to lose, break, or come loose. Never come loose Patent Rubber Holders. Stainless steel Hardware. Light Weight aluminum body. No Rusting or corrosion. Choose your finish: type-2 Hard Red Anodizing, or Non-Anodized.
All Tool Grabbers come with truck mount hardware and building wall hardware. We do not recommend the installation of any Tool Grabber on a vehicle exterior.

Tool Grabber I

A single Tool Mount Pocket that holds lances, wash wands, long handle tools, pry bars, etc.

Choose Red-Anodized or Non-Anodized

PART # Wand Length Price

# 124-904 Red-Anodized $135.00

# 148-255 Non-Anodized $103.00

Mounting Instructions

Choose Model

Tool Grabber II

Two Tool Mount pockets that hold lances, wash wands, long handle tools, pry bars, etc.

Choose Red-Anodized or Non-Anodized

PART # Wand Length Price

# 116-462 Red-Anodized $195.00

# 101-200 Non-Anodized $158.00

Mounting Instructions

Choose Model

Tool Grabber III

Three Tool Mount Pockets that hold lances, wash wands, long handle tools, pry bars, etc.

Choose Red-Anodized or Non-Anodized

PART # Wand Length Price

# 133-494 Red-Anodized $254.00

# 197-698 Non-Anodized $212.00

Mounting Instructions

Choose Model

Tool Grabber IV

Four Tool Mount Pockets that hold lances, wash wands, long handle tools, pry bars, etc.

Choose Red-Anodized or Non-Anodized

PART # Wand Length Price

# 154-586 Red-Anodized $334.00

# 162-071 Non-Anodized $212.00

Mounting Instructions

Choose Model

Tool Grabber V

Five Tool Mount Pockets that hold lances, wash wands, long handle tools, pry bars, etc.

Choose Red-Anodized or Non-Anodized

PART # Wand Length Price

# 158-272 Red-Anodized $414.00

# 125-620 Non-Anodized $327.00

Mounting Instructions

Choose Model

Return to Dig Pig Nozzles

Return to Excavation Nozzles & Tools