Zoeller M264 Sewage Pump

Zoeller M264 Sewage Pump

M264 Sewage Pump with 9' Cord

The 4/10 HP Model M264 automatic Sewage Pump is designed to remove sewage from sewage ejector applications. This corrosion resistant pump will provide the dependability expected from a Zoeller pump. Backed by a 3-year warranty, every pump is submerged in water and tested to its published performance curve, ensuring it meets your expectations and delivers peace of mind right-out-of-the-box.
Features and Benefits:

Oil-filled motor and cast iron motor housing for optimal heat dissipation which prevents the pump from overheating.

Automatic pump with a time-tested, reliable, preset, built-in snap action switch that makes for easy installation.

Corrosion resistant engineered plastic vortex impeller to allow free passage of 2" spherical solids which prevents clogging and increases reliability.

Stainless steel float guard that prevents material and other solids in the waste stream from collecting on the float ensuring proper operation every time.

Solid, buoyant, polypropylene float to eliminate the possibility of water infiltration allowing the float to remain buoyant and functional at all times.

Powder-coated epoxy finish provides corrosion-resistance and extends the life of the pump in harsh environments.

Stainless steel screws, switch arm, guard, handle and hardware to prevent rust and corrosion over the life of the pump.

100% Factory Tested - every pump is submerged in water and tested at the factory to ensure that it performs as expected right out of the box.

Comes with a 3-year limited warranty giving you protection over your investment and the peace of mind you expect in a quality product.

Specifications:

Max Flow Rate: 90 GPM

Horsepower: 4/10 HP

Voltage: 115 V

Phase: 1 Ph

Amps: 9.4

Hertz: 60 Hz

RPM: 1725

Discharge: 2" NPT

Solids Handling: 2" (50 mm) spherical solids

On/Off Points: 12-1/2" (31.8 cm) / 4-1/2" (11.4 cm)

Impeller Material: Engineered Plastic

Impeller Type: Vortex

Cord Length: 9' (2.7 m)

Installation Instructions

Technical Data Sheet

Parts List

Price $580.00

Free Freight - 48 States

Zoeller M264 Sewage Pump

Model Description Price

# 264-0001 M264 Sewage Pump with 9' Cord $580.00

Our Model M264 Sewage Pump with a is designed to remove raw sewage and wastewater in sewage ejector applications. The professional-grade, 4/10 HP 264 is a proven and economical sewage pump. Known as the "Waste-Mate," the M264 is a fully automatic float-operated sewage pump. The white polypropylene float is solid so it cannot become waterlogged. This ensures that it is always buoyant and able to turn the pump on when necessary.

The pump's engineered plastic vortex impeller allows it to pass 2″ spherical solids. The impeller's smooth surface and clearance in relation to the pump housing allows water and solids to pass freely through the pump. This combination of features lessens the chance of clogging and downtime.

The Model 264's switch case, motor housing, and pump housing are each constructed of cast iron. The pump's identification tag, float guard, handle, switch arm, and hardware are made of non-corrodible stainless steel. This attention to detail ensures that the Model 264 is able to withstand the demands of residential sewage ejector applications.

Every pump is submerged in water and tested to its published performance curve, ensuring it meets your expectations and delivers peace of mind right-out-of-the-box.

Return to Sewage Pumps

Not sure which Zoeller Sewage Pump is right for you? Call us and allow one of our knowledgeable sales staff to guide you.