Zoeller WM49 Sump Pump

Zoeller WM49 Sump Pump

WM49 Water Ridd'r

The 1/4 HP Model WM49 automatic Sump Pump is designed to remove groundwater from basement sump applications. This corrosion resistant pump will provide the dependability expected from a Zoeller pump. Backed by a 2-year warranty, every pump is submerged in water and tested to its published performance curve, ensuring it meets your expectations and delivers peace of mind right-out-of-the-box.
Features:

Oil-filled motor and cast iron motor housing for optimal heat dissipation which prevents the pump from overheating.

Automatic pump with a built in wide angle switch makes for easy installation.

Corrosion resistant engineered plastic vortex impeller to allow free passage of solids which prevents clogging and lessens downtime.

Powder-coated epoxy finish.

Stainless steel screws and hardware prevent rust and corrosion.

100% Factory Tested

Specifications:

Max Flow Rate: 32 GPM

Horsepower: 1/4 HP

Voltage: 115 V

Phase: 1 Ph

Amps: 4

Hertz: 60 Hz

Discharge: 1-1/2" NPT

Solids Handling: 3/8" (9 mm) spherical solids

On/Off Points: 11-1/4" (28.6 cm) / 4-1/8" (10.5 cm)

Impeller Material: Engineered Plastic

Impeller Type: Vortex

Technical Data

Installation Instructions

Starting at $304.00

Free Freight - 48 States

Choose WM49 Cord Length

Zoeller WM49 Sump Pump

Model Description Price

# 49-0005 WM49 Sump Pump with 10' Cord $304.00

# 49-0006 WM49 Sump Pump with 20' Cord $330.00

Our Model WM49 Sump Pump is designed to remove unwanted groundwater in basement sump applications. The 1/4 HP "Water Ridd'r" Model 49 is a fully automatic float-operated sump pump. The WM49's tethered float switch utilizes a mechanical float switch for operating the pump. This is a time-tested method of controlling the pump.

The Model 49 is a compact option for small sump pits. The Model 49 pump is constructed with a cast iron motor housing. This enables it to withstand the most demanding basement sump applications. The corrosion resistant engineered plastic vortex impeller has a smooth surface allowing water and solids to pass freely through the pump. All of the Model 49's hardware is made of high-quality stainless steel. All of these features highlight the fact that it was designed with longevity in mind balanced by price.

The factory-set float switch is set to maximize pump range while ensuring no float hang-ups. The sturdy pump base keeps larger debris from clogging the pump and prevents the pump from moving around the pit.

Every pump is submerged in water and tested to its published performance curve, ensuring it meets your expectations and delivers peace of mind right-out-of-the-box.

Return to Sump Pumps

Not sure which Zoeller Sump Pump is right for you? Call us and allow one of our knowledgeable sales staff to guide you.